Description: ANYCUBIC Photon Mono 2 Technical Specifications ● Removable Cover: Effectively blocks UV radiation● Z Axis: Double liners with 10 μm accuracy● Build Platform: Laser engraving aluminum alloy● Exposure Screen: 6.6" monochrome (4,096 x 2,560 px)● Oversized Protection Film: Replaceable anti-scratch film● Light Source: Parallel matrix upgrade light source● Power Supply: 48W rated power● Control Panel: 2.8''TFT touch-control● Data Input: USB Type-A 2.0● Machine Leveling: 4-point manual leveling● Printing Speed: ≤ 5cm/hr. 1.97in/hr● Printing Dimensions: 165 x 89 x 143 mm/6.5 x 3.5 x 5.6 inches (HWD)● Machine Size: 390 x 229 x 235 mm / 15.4 x 9.01 x 9.5 inches (HWD)● Machine Weight: 4kg / 8.8lb Bigger and Higher Resolution Photon Mono 2 uses a 6.6-inch monochrome LCD screen with a resolution of 4096*2560, which can display the models' tiny details. Ultra-Large Screen Protector The ultra-large scratch-resistant screen protector helps to prevent screen scratches and resin penetration. With up to 95% light transmittance, it can fully protect the LCD screen while ensuring printing accuracy. Upgraded LighTurbo Matrix The upgraded LighTurbo matrix provides a stable and uniform parallel light source, thus effectively reducing the layer lines and eliminating grid lines. Therefore, Photon Mono 2 can make the model details more vivid and make the model surface delicate and smooth. Models Display Parts List Funnel Gloves Mask Screen protector Platform Power adaptor Resin vat Levelling paper Scraper USB drive Tool set ANYCUBIC Wash and Cure 3 Larger Size for Upgraded Capacity Compared to Anycubic Wash & Cure 2.0, the Anycubic Wash & Cure 3 has an impressive 100% increase in cleaning basket capacity, now at 3 liters. The total volume of the cleaning bucket has been expanded to 4 liters. This makes it perfectly tailored for LCD (light-curing) 3D printers with a size of 7.3 inches or less.The curing size has increased by 15%, up to 160*180 millimeters, to accommodate larger and more models for single post-processing session. Localized Strengthening, Uniform Curing The "Innovative Flexicure Gooseneck Light Design" increases the energy value by 30,000uW/cm² within a 1-3 cm irradiation range, significantly strengthening the curing effect on subtle areas such as the top of models and the hem of garments. By adopting a brand new arrangement of light beads and lens light source, Anycubic Wash & Cure 3's curing uniformity has been enhanced by 20% compared to its predecessor 2.0. This results in a more thorough and comprehensive curing of the entire model. Dual-layer Design, IPA Saving The double-layered PP material cleaning basket is designed to support simultaneous cleaning with the platform. It features two adjustable heights at 100mm and 165mm, providing flexibility to accommodate printing platforms ranging from 5.9 inches to 7.3 inches. This design maximizes the efficiency of IPA usage. Simple Operation, Quiet and Efficient Cleaning and curing dual modes, easily selected with one click; Enhanced Gooseneck light curing mode can be easily toggled on and off with one click. Infinite rotary knob control, adjustable from 1 to 30 minutes at will. Through a more sealed structural design and software optimization, the noise interference generated during cleaning and curing is reduced[1], creating a quieter and more comfortable working environment. [1] Measured by Anycubic Laboratory the maximum sound < 65dB in the operating state of the machine. Models Display In The Box ANYCUBIC Wash and Cure 3 Plus Partial Enhanced The innovative Flexicure gooseneck lights design increases the energy value by 30,000uW/cm² in the 1~3cm irradiation range, which greatly enhances the curing effect on details such as the top of the model and the figure's skirt. Overall Curing Adopting a brand-new arrangement of lamb beads combined with a lens light source, it offers a 20% improvement in curing uniformity compared to wash&cure plus, thus 3d models can achieve better quality and consistency after curing. On Jun 6, 2024 at 20:44:10 PDT, seller added the following information:
Price: 89 USD
Location: NJ/CA
End Time: 2024-10-06T00:58:54.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: ANYCUBIC
Model: Photon MONO 2
MPN: PM2A0BK
Interface: USB 2.0, SD Card, USB memory
Features: DIY Kit, Ultra-Large Screen Protector, Laser-engraved Build Plate, Brand New Photon Workshop Slicer Professional and Free
Manufacturer Warranty: 1 year
3D Technology: LCD
Control Panel: 2.8''TFT touch-control
Maximum Print Size: 165*89*143mm
Print inches: 5.6'' x 3.5'' x 6.5''
Maximum Resolution: 4096*2560
Nozzle Size: NO
Printing Speed: 60mm/h
Light transmittance: 3.5%-4.5%
Contrast ratio: 300:1
Service life: 2,000h
Country/Region of Manufacture: China
Item Length: 235mm
Item Width: 229mm
Item Height: 390mm
Unit Quantity: 1
Unit Type: Unit
Available Variations
Color: Photon Mono 2
Price: 149 USD
Available Quantity: 30
Quantity Sold: 13
Color: Photon Mono 2
Price: 169 USD
Available Quantity: 20
Quantity Sold: 2
Color: Photon Mono 2
Price: 179 USD
Available Quantity: 20
Quantity Sold: 0
Color: Photon Mono 2
Price: 189 USD
Available Quantity: 20
Quantity Sold: 2
Color: Photon Mono 2+Wash and Cure 3
Price: 248 USD
Available Quantity: 20
Quantity Sold: 9
Color: Photon Mono 2+Wash and Cure 3
Price: 259 USD
Available Quantity: 20
Quantity Sold: 3
Color: Photon Mono 2+Wash and Cure 3
Price: 269 USD
Available Quantity: 20
Quantity Sold: 2
Color: Photon Mono 2+Wash and Cure 3
Price: 279 USD
Available Quantity: 20
Quantity Sold: 3
Color: Photon Mono 2+Wash and Cure 3 Plus
Price: 309 USD
Available Quantity: 20
Quantity Sold: 1
Color: Photon Mono 2+Wash and Cure 3 Plus
Price: 329 USD
Available Quantity: 20
Quantity Sold: 0
Color: Photon Mono 2+Wash and Cure 3 Plus
Price: 339 USD
Available Quantity: 20
Quantity Sold: 1
Color: Photon Mono 2+Wash and Cure 3 Plus
Price: 349 USD
Available Quantity: 20
Quantity Sold: 1
Color: Wash and Cure 3
Price: 89 USD
Available Quantity: 30
Quantity Sold: 18
Color: Wash and Cure 3 Plus
Price: 159 USD
Available Quantity: 20
Quantity Sold: 3
