Dakota Digital 1977-90 Impala Caprice Analog Dash Gauge System VHX-77C-CAP-K-B

Description: Dakota Digital 1977 - 90 Chevy Impala / Caprice and 1984-86 Pontiac Parisienne VHX InstrumentsVHX-77C-CAP-K-B with BLACK ALLOY style and BLUE backlighting The new VHX Systems fit directly into the stock instrument bezel of a 1977- 90 Chevy Caprice/ Impala and 1984-86 Pontiac Parisienne without modification, adding a wealth of features to this iconic vehicle. This system requires the use of the stock clear lens to cover it (in addition to the integrated lens). Stock lens is NOT included with this system. Due to the GM dash design, there is no good way to remove the stock lens.*Uses factory bezel/ trim/ fascia (not included, shown in any pic for demonstration purposes only).Fully lit needles, backlit faces, and highly visible LCD message centers are a few of the things that you can see which set the VHX Series apart from yesterday’s traditional approach to instrumentation. A few of the features which you don’t normally see are the micro-controlled precision stepper motors, solid state sensors for unparalleled accuracy, and user-customizable display feedback, all supported by an unrivaled limited lifetime warranty which has become the standard for Dakota Digital instrumentation systems. Completely engineered and manufactured at Dakota Digital's facility in Sioux Falls, South Dakota, the VHX Series has completely revolutionized the instrumentation industry! MHX-77C-CAP-K-B Metric system (KM/H and degrees Celsius) is available as a custom option for no additional cost, but may take approximately 8-16 weeks to build. Some systems may take a little longer due to high demand affecting production. If you want to purchase the metric system, please just include a note with your payment or send us a message after you make your purchase. VHX System Includes: Analog Gauges Speedometer - 0-160 MPH (optional metric version 0-255 kmh) Tachometer - 0-8000 RPM Oil Pressure - 0-80 psi Water Temperature - 100-260ºF (optional metric version 40-120ºC) Fuel Level - E, 1/4, 1/2, 3/4, F Voltmeter - 9-17 VDC Lighting - Back lit technology is popular with performance instrumentation due to precise lighting allowing you see what is truly important when you really need it at a quick glance. Each number, tick mark, annunciator, needle, indicator and digital message center is lit by a series of LEDs behind the gauge face. Digital Message Center Standard Displays: Odometer (One time user settable, Million Mile) Dual (A/B) Trip Meter (0-9,999.9) Clock (12 hour) Performance Meters: 0-60 MPH Timer (0-100 kmh) 1/4 mile time 1/4 mile end speed (trap speed) High speed recall High RPM recall Gauges: Speedometer (0-255 MPH / KM/H) Tachometer (0-9,990 RPM) Oil Pressure (0-100 psi displayed in 1 psi increments) Water Temperature (100-300ºF / 40-150ºC displayed in 1ºF/ºC increments) Voltmeter (9-17 VDC) Fuel Level (0-99% full) Lighting: Auto-contrasting LCD display for optimal view in the brightest of sunlight. LED backlit at night to match/complete the look at night.Built-In Indicators Turn Signals (Left/ Right) High Beam Check Engine Parking Brake Cruise Control (On/ On & Engaged when vehicle is equipped) Gear Position (Optional GSS-3000 sensor required, sold separately) 4 x 4 (When vehicle is equipped) Wait to Start (When vehicle is equipped) **Not all OEM indicator lamp functions will be replaced. If additional indicators are desired within the new instrument system, consider repurposing any unused indicators to suit your application. Included Sensors: Water Temperature - 1/8" NPT, ground isolated sensor with a 10 ft harness. Oil Pressure - 1/8" NPT solid state sensor with a 10 ft harness. Cable Drive Speed Sensor/Generator - Replaces GM style speedometer cables with a 10 ft harness. Sensor requires approximately 5" clearance extending between the cable drive output and any obstruction. Part # 130011 (sold separately) allows for relocation of the pulse generator when additional clearance is required. (Tremec and Ford style adaptors available on request.) Bushings - Each kit comes with 1/8" to 1/4", 3/8" and 1/2" NPT bushings along with bushings for 12mm and 16mm x 1.5 threads. Control Box Dimensions - 5.5" x 3.5"x 1" Calibration Pushbutton - Dakota Digital instruments are programmed and operated by the push of a button. Simply mount the included pushbuttons supplied with your gauges in a convenient and easily accessible location. These buttons are used to calibrate your speedometer, set the cylinder count and the fuel level gauge. Once properly configured these same buttons are used to access the wealth of information located in the Digital Message Centers. More info about this system and pics are available below. This listing is for ONE VHX gauge system with your choice of style and backlighting color. Please let us know your options when you make your purchase. VHX-77C-CAP with BLACK ALLOY style and BLUE display: BLUE Display At Night: UP CLOSE (BLACK ALLOY style): BACK:

Price: 926.25 USD

Location: Sioux Falls, South Dakota

End Time: 2025-01-20T00:17:06.000Z

Shipping Cost: 0 USD