Game Boy Color Laminated AMOLED Retro Pixel Touch Screen Kit

Description: **This kit is strongly recommended to use with these shells only** Upgrade your Game Boy Color with the Laminated AMOLED Retro Pixel Touch Screen Kit by Hispeedido. Enjoy distortion-free visuals with high definition LCD and 16:1 integer scaling. With touch function and 25% more display area, it also features a built-in OSD menu, Retro Pixel effects, frame blending, 10 brightness levels, and 8 color modes. FEATURES: 16:1 Integer Scaling 25% Larger Display Area Built-in OSD Menu with Touch Screen Controls 4 Retro Pixel Effects 32 Logo Color Options Frame Blending Functionality 10 Brightness Levels 8 Color Modes Adjustable Image Position LCD is pre-laminated to glass lens. Display area is larger than the original. Only recommended when using a custom laminated shell from Funnyplaying or Hispeedido. Shell modification required for all other shells. No refunds are given if a non-recommended shell is used. INCLUDED: 1 x Laminated AMOLED Display 1 x PCB 1 x Flex Cable 2 x Wires 1x Insulation Film 3x Pieces of Kapton Tape PAIRS WELL WITH: Game Boy Color Retro Pixel Laminated Q5 IPS Shell DOCUMENTATION: See product photos for install information. Non-recommended shell trim guide - *Please read warning at the top of product page before proceeding with purchase/install. We only recommend pairing this IPS kit with the laminated shells by FunnyPlaying or Hispeedido. All other shells will require modifications, install at your own risk. How to test your LCD kit. NOTES: Touch the bottom of the screen for 5 seconds to bring up the OSD menu. Swipe up and down to navigate, use arrows to adjust values. We only recommend installing this kit in laminated shells. All other shells will require trimming, install at your own risk. WARNINGS: You do not need to purchase a separate lens. Removing pre-adhered lens from LCD can result in damage to the LCD and will void product warranty. If you received an extra lens in your order, this was likely a included plastic lens with a shell and should NOT be placed on top of the pre-adhered lens. Test before installation! When you receive a backlight/LCD kit, you should perform a dry run before installing to assure that nothing has been damaged in transit. A dry run or test fit means the kit is not installed in the shell. This includes the use of adhesives, brackets, and any performed soldering. All ribbon cables should have no bends or creases in them. If you are unsure how to perform a dry run, please contact our support team and we will be happy to help. Backlight kits that have been installed are not eligible for replacement or return. LCD may break if put under too much pressure or dropped. Please exercise extreme caution when installing. *Soldering the BAT wire is required for operation of this kit. Soldering this wire only will not void the return policy.

Price: 55.24 USD

Location: Willow Grove, Pennsylvania

End Time: 2025-01-09T14:13:04.000Z

Shipping Cost: 5.99 USD