Happymodel Crux F405HD ELRS AIO 3-In-1 Flight Controller

Description: The CruxF405HD ELRS AIO flight controller comes with an integrated UART 2.4GHz ExpressLRS receiver and 20A BLHeli_S ESC (Bluejay firmware pre-installed) which could support 2-4s battery. Bigger Mosfet could support high to 20A currents and would be better for 2-4S toothpick drone or long-range FPV drone. Reserved 6-pin socket for DJI HD equipment plug and play. It’s a great solution for building HD digital FPV drone. Specifications: Flight Controller: MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH) GYRO Sensor: ICM42688 (SPI connection) Mount hole size: 20mm*20mm Power supply: 2~4S battery input (DC 8.7V-17.4V) Built-in 20A(each) Blheli_S 4in1 ESC Built-in Serial ExpressLRS 2.4G (Default connected to UART2) Built-in BMP280 Barometer Built-in 8MBp blackbox Built-in voltage meter sensor, voltage meter scale 110 Built-in current meter sensor , current meter scale 470 Flight controller firmware target: BETAFLIGHTF4 Onboard 4-In-1 ESC: MCU upgraded to EFM8BB21 Power supply: 2-4S LiPo/LiPo HV (7v/17v) Currents: 20A continuous peak 25A (5 seconds) Support BLHeliSuite programmable Factory firmware: Bluejay 0.19.2 Firmware target: F_H_40_48_v0.19.2 Default protocol: DSHOT150/DSHOT300/DSHOT600 Onboard UART ELRS 2.4GHz RX: Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz RF Frequency: 2.4GHz Antenna plug: IPEX Telemetry output Power: <12dBm Receiver protocol: CRSF Default firmware version: ExpressLRS V3.0.1 Voltage and Amperage Settings: Voltage meter scale: 110 Amperage meter scale: 470 Includes: 1x Happymodel Crux F405HD ELRS AIO 3-In-1 Flight Controller 1x Antenna 1x Power Connector 4x Anti-Vibration Grommets 4x Solder on Connectors Download Installation Tips

Price: 67 USD

Location: Madison, Alabama

End Time: 2024-10-15T20:12:15.000Z

Shipping Cost: N/A USD