Description: HappyModel Mobula7 1S HD X12 5in1 AIO Flight Controller 400mW Runcam Split3-Lite 1080P DVR RS0802 KV20000 1S FPV Tinywhoop Drone Mobula7 1S HD version is a light and efficiency 75mm brushless whoop which provide 1080P HD video record function. A highly integrated AIO Flight Controller, supports ESC with a maximum current output of 12A. We added blackbox for this 1s 75mm HD recorder whoop. Now it could support gyroflow. Although the external blackbox is not install perfectly and insert SD card is not friendly to most of the people, however we still think it’s really excited for this small whoop could record a video with gyroflow steady and keep safe flying . Features: X12 5-IN-1 AIO flight controller VTX Power up to 400mw ELRS V2.0 Support NEW RS0802 KV20000 motors 1080P HD Video record Blackbox Ready support GYROFLOW Smooth and powerful Compatible for 1S Lipo/LIHV Recommend 1S 450mah/550mah/650mah batteries (Not include) Specifications: Brand Name: Happymodel Item Name: Mobula7 1S HD 75mm Micro FPV whoop drone Wheelbase: 75mm Size: 99mm*99mm*45.5mm Weight: 33g Receiver option: SPI 2.4GHz ELRS V2.0 SPI Frsky D8/D16 Package includes: Item Name Qty Mobula7 1S 75mm whoop Drone Frame (Mobula7 v4 frame) 1 Option1: X12 ELRS V2.1 flight controller built-in SPI ELRS 2.4G receiver 1 Option2: X12 Frsky V2.1 flight controller built-in SPI FRSKY 2.4G receiver External Blackbox Module support gyroflow 1 RS0802 KV20000 brushless motor 4 Gemfan 1610-2 bi-blade propellers(4cw+4ccw) 1 Runcam Split3-Lite Camera+1080P DVR 1 1S series balance charging board 1 Propeller disassemble tool 1 Spare parts specifications: Motor Mode: RS0802 KV20000 Configu-ration:9N12P Stator Diamter:8mm Stator Length:2mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.*Len):Φ10.5mm*13.5mm Weight(g):2.0g No.of Cells(Lipo):1S only Propellers Weight:0.24g Material:PC Pitch:1 inch Props Dia:40mm Center Thickness:5mm Center Hole Dia:1.5mm Flight controller X12 ELRS V2.1 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280 X12 Frsky V2.1 flight controller built-in SPI FRSKY 2.4G receiver Target: CRAZYBEEF4FR MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: BMI270(SPI connection) Mount hole size: 25.5mm*25.5mm Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 12A(each) Blheli_S 4in1 ESC Built-in Betaflight OSD(SPI Control) Built-in 5.8G OpenVTX 0mw~400mw Built-in ExpressLRS 2.4G,Frsky D8/D16 Built-in voltage detection Built-in current sensor Onboard 4in1 ESC Power supply: 1S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds) Support BLHeliSuite programmable Factory firmware: Z_H_30_REV16_7.HEX Default protocol: DSHOT300 Support Bluejay firmware When use Blujay firmware with 48khz, should set startup power to 1100/1200 Onboard SPI ExpressLRS 2.4GHz Receiver Packet Rate option: 50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V2.0 RF Frequency: 2.4GHz Antenna : Enameled copper wire length 30mm Telemetry output Power: <12dBm Receiver protocol: SPI ExpressLRS Compatible with ExpressLRS V2.0 TX Module Couldn’t flash separately ExpressLRS firmware Onboard Frsky SPI D8/D16 receiver Version SPI BUS receiver Frsky D8 D16 compatible Could working on FRSKY D8/D16/D16 LBT/REDPINE/SFHSS protocol Channels: 8ch or 16CH No ground interference ( Transmitter and receiver 1 m from the ground): 200meter Failsafe support Onboard 5.8g OPENVTX Firmware version: OPENVTX Smartaudio v2.1 PIT Mode support RCE Mode support Channels:48ch Transmitting Power: 0/RCE/25mw/100mw/400mw Power supply: DC 5V Current (5v): <650ma (400mw) Runcam Split3-Lite Model: RunCam Split3-Lite Field of View(FOV):Recording FOV 165°(FPV FOV: 165 ° @16:9, 130 ° @4:3) Video Resolution:1080@60fps/1080@50fps/1080@30fps/720@60fps Video File Format: MOV Image Resolution:2 MP TV Mode: NTSC (720*480)/PAL (720*576) Switchable Interface: JST 1.25mm / UART and SH 1.0mm Max Micro SD Card Supported 64G(need Class 6 or above, recommend Class 10/UHS-I/UHS-II/UHS-III) Hole Distance of Installation: 25.5*25.5mm PCB Size: 29*29mm Lens Module Size: 14*14mm Lens Specs: M9 Power Input: DC 5-20V(Non-direct power supply from battery. Powered directly with battery will generate surges and burn the camera.) Working Current: 450mA @5V External Blackbox and voltage booster module Size:18*15.5*4.5 With Built-in Voltage booster module Weight:1.5gram SD Card support max to 32GB SD Card need to use FAT32 Format Notes: Need to careful to insert the TF SD Card , and don’t pull it out while install the battery.
Price: 209.18 USD
Location: 深圳
End Time: 2024-09-21T09:15:49.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: 21st Century Toys
Country/Region of Manufacture: China
MPN: Does Not Apply
Available Variations
Color: For ELRS 2.4G BNF
Price: 209.18 USD
Available Quantity: 80
Quantity Sold: 0
Color: For FRSKY BNF
Price: 209.18 USD
Available Quantity: 80
Quantity Sold: 0
Color: For FLYSKY BNF
Price: 209.18 USD
Available Quantity: 80
Quantity Sold: 0