Nerf Rival Gun Lot of 5 Blasters McCree Takedown Apollo Finisher Knockout TESTED

Description: These Nerf Rival blasters are all fully tested and working perfectly. They are used blasters so may have minor paint wear, but there is no damage or cracks anywhere, and all are fully functional. There are no magazines or balls included. Included Blasters:2018 McCree / Cassidy Overwatch Blaster2019 Takedown XX-800 Shotgun2014 XV-700 Apollo2019 XX-700 Finisher2018 XX-100 Knockout -The McCree Blaster is a breech-loading single-fire blaster. It is based on the Peacekeeper revolver used by the Overwatch character Cassidy (previously "McCree"). The blaster's safety switch is located under the barrel. A priming indicator sticks out of the bottom of the barrel as well when it is primed. This indicator doubles as an unjamming button; when engaged, the user can press it down to allow the blaster to be primed again in order to clear any jams. -The Takedown is a pump-action blaster that holds up to eight High-Impact Rounds at a time, in an internal magazine. It looks similar to the Overwatch Reaper Blaster and Rough Cut 2x4. Above the muzzle is a small tactical rail, and another one located on the back. Similar to other RIVAL blasters, a safety lever is located above the firing trigger. On the left of the blaster is a priming indicator. -The Apollo XV-700 is a slide-action magazine-fed blaster with its magazine well built into its handle. A safety feature prevents the blaster from being fired when not in use; the switch for this sits just above the firing trigger. On the rear of the blaster is a priming indicator that turns orange when the Apollo is primed. A single tactical rail sits atop the blaster. It advertises a firing speed of a hundred feet per second. -The Finisher is a slide-action magazine-fed blaster. Its unique magazine allows for it to be opened up and reloaded even when inserted into the blaster. The magazine release button sits behind the magazine well. Both the unjamming lever and a safety button are located on the left side of the blaster, above the firing trigger. Despite the presence of an unjamming button, the blaster can be primed multiple times without using the button. A priming indicator is built into the rear of the blaster, turning orange when the blaster is ready to be fired. While the priming slide is pulled back, the blaster's breech protrudes out of the muzzle. There is a single tactical rail on top of the blaster. -The Knockout XX-100 is a slide-action blaster that is loaded through a breech. This is be accessed by pushing the breech lever, which is located above the firing trigger. Upon pulling the breech lever, the spring-loaded breech opens automatically for loading and must be manually closed for the blaster to be fired. The blaster itself is primed by a priming rod, resembling that of external mechanism blasters such as the Jolt EX-1. However, unlike most external mechanism blasters, the priming rod is not directly connected to the plunger rod and will not automatically return to its resting position; it must be manually pushed back up and into place to fire the blaster. Below the muzzle is a place to store four High-Impact Rounds, two on each side of the Knockout. Under the trigger is a safety switch. It advertises a firing velocity of ninety feet per second Please see pictures for item conditions. Thanks for looking!

Price: 59.99 USD

Location: Brillion, Wisconsin

End Time: 2024-09-02T13:52:42.000Z

Shipping Cost: 19.99 USD