ProBoat Miss Geico 36 Stock Setup VXP BV645/2 45mm 1.6p 3/16" Left & Right

Description: Stock Setup ProBoat Miss Geico 36 Twin and Stock Set Up TFL Zonda Twin.Octura Inspired Design - Non Lifting, De Tongued PropDiameter 45mm, Pitch 1.6, B CUPPED & V Cut ( freeing the prop as that area is redundant once rpm pickups - don't file it yourself as you will have trouble balancing the prop )2 Blades - 3/16" Shaft ( 4.76 mm ) - CNC Aluminium 7075 Alloy ( Aircraft Material ).The First CNC Cupped Prop for RC Boats, borrowing a 20 year old technology from the Power Boats where propellers are send to Specialist Prop Shop for cupping. Here, they will incorporate cupping at the trailing edge of the prop, Power Boaters' found after cupping that the RPM reduces and Speed increases. It is like swimming with your hand cupped you will realise that you can pull better.The pitch of the prop had increased after cupping, but more importantly upon analysing with normal prop design the lift is concentrated at the front 30% of the blade whereas a cupped prop the lift is spread throughout the length of the blade. So it is not just going for higher pitch to get the speed but a more efficient and effective prop design. Cupping by the Specialist Prop Shop is random they might not be able duplicate another of your favorite prop when you revert to him a couple of months later. We have taken out the randomness with proper standards - A Cup, B Cup and C Cup ( yes C Cup will be the most handful as with our female species ) with regards to the drop and radius, so we can deliver standardised cupping for full spectrum of prop diameter. Nothing random.A Computer Aided Design, Computer Simulated and Water Tested Propeller. This CNC Product is Meticulously Made - No Further Balancing, Polishing or Sharpening is Needed. 1 order - 2 pieces ( 1 left and 1 right )

Price: 90.99 USD

Location: Singapore

End Time: 2025-01-15T09:46:18.000Z

Shipping Cost: 11.99 USD