QNK 7.5KW 10HP 220V AC 33A VFD Converter Single to 3 Phase Inverter Variable ...

Description: QNK 7.5KW 10HP 220V AC 33A VFD Converter Single to 3 Phase Inverter Variable Frequency Drive for CNC Spindle Motor Speed ControllerAbout this item【7.5KW (10HP) Variable Frequency Drive】Input: 1-phase/3-phase 220 VAC (+/- 15%), 0- 33 A, and 50/60 Hz. Output: 3-phase 220 VAC, 0-33A, and 0-1,000 Hz.【Low-Noise Operation & Low Electromagnetic Interference】 The PMW control technology and a component compatibility design allow this VFD for low-noise operation and low electromagnetic interference.【V/F Control & Vector Control】 The VFD frequency setting mode includes digital setting, analog setting, serial communication setting (RS485 communication port, adopting standard international MODBUS main circuit control), PID setting (advanced calculus PID closed-loop arithmetic, quick responding speed, and high suitability), etc.【Improved Safety & Durability】QNK VFD features protective functions for overload, fuse, over voltage (DC voltage>400V) or under voltage (DC voltage<200V), restart, stall, short circuit, and overheat. Moreover, it comes with copper coil internals and a nonflammable exterior for durability and a multi-grid design with enough cooling space between the electronic components and the case for fast heat dissipation.【Wide Application】The VFD can be used in various types of equipment such as Spindle Motors, CNC Routers, Milling Machines, Pumps, Compressors, Grinders, among others.【Attention】Please Note: 1.The VFD can’t be used as a power source for other equipment, or to drive a motor with a supply voltage lower than 80V. 2.Do not connect the VFD’s output terminals with capacitive loads.3.Choose a VFD with a larger power output when operating heavy equipment like the crane and compressor, e.g.,a 5.5 Kw motor should be connected to a 7.5 Kw VFD. 4.If a generator is used to power the VFD, ensure that the generator's output voltage level is within +/-15%. 7.5KW 220V Variable Frequency DriveThis VFD converter can be used for constant-torque loads ( air compressors, HVAC units, and other hard-start kits.) and variable-torque loads (pumps, fans, etc.). It can also be used as a motor speed controller and phase converter. This VFD features 1- or 3-phase input and 3-phase output, and you can adjust the speed as needed.Adopting sine wave PWN, this inverter’s control system features high torque drive, high-accuracy wide-range speed regulation that has 8-stage / 16-stage speed control, program operation, four settings of acceleration/deceleration time, and more.NOTE:1. The VFD can’t be used as a power source for other equipment, or to drive a motor with a supply voltage lower than 80V.2. Do not connect the VFD’s output terminals with capacitive loads.3. Choose a VFD with a larger power output when operating heavy equipment like the crane and compressor, e.g.,a 5.5 Kw motor should be connected to a 7.5 Kw VFD.4. If a generator is used to power the VFD, ensure that the generator's output voltage level is within +/-15%.SpecificationsPower: 7.5KWInput Voltage: 220V(+/-15%)/180V-250VOutput Voltage: 0-220VInput Current: 0-33AOutput Current: 0-33AInput Phase: 1 or 3 PhaseOutput Phase: 3 PhaseInput Frequency: 50/60 HzOutput Frequency: 0-1000 HzPlease note: Do not connect to generators that is over 250V.Package Includes1* 7.5KW VFD1* Operation Manual1* Extension Wire w2-A3-AU1075

Price: 189 USD

Location: Sacramento, California

End Time: 2024-10-20T20:05:28.000Z

Shipping Cost: 17.1 USD