Description: FOR THREADED TERMINALS ONLYPURCHASE GENUINE NGK ITEM FROM OUR STORE DONT BUY THIS CRAP!THIS CRAPS MADE IN INDIA AND THE OHMS DONT MEASURE CORRECTLY tHE ONLY REASON WE ARE SELLING THIS IS BECAUSE OF BAD ACTORS ON EBAY TRYING TO UNDERCUT OUR GENUINE NGK SALESTHERE OK FOR A LAWN MOWER OR MINI BIKE , BUT I WOULDN'T TRUST THEM A MILE AWAY FROM HOME. EVERY CAP ON EBAY THAT LOOKS LIKE THIS AND DOESN'T HAVE "NGK" IN FRONT OF THE LETERS IS A KNOCKOFF PRODUCE IN A THIRD WORLD COUNTRY . (1) RESISTOR SPARK PLUG CAP BOOT REPLACEMENT FOR NGK LB05FP LB05F 8020 90 DEGREE ELBOW Spark Plug Cap Resistor Cover - 90 Degree - LB05FP New spark plug resistor cover replaces NGK's now discontinued LB05FP for the CB350 twin and most of Honda's other twin's from the 60's and 70's. This one has a 90 degree bend. For 14mm thread spark plugs without the terminal nut. Special rubber waterproof boot to seal out the elements. We recommend using non-resistor type spark plugs when using resistor caps on vintage Honda's.Rubber waterproof boots to seal out the elements, so the engine won't cut out if it rains.For use with 7mm diameter plug wiresFits all Honda Twins from the 60's and 70's plus a lot of single cylinder 4 strokes and 2 strokesSold Individually Replaces NGK Part Number: 8030 Replaces Honda Part Number: 30700-098-153 Installation tips: Remove terminal nut before installing new spark plugs. It's screwed onto the top of the spark plug. Put a light coating of anti-seize on the spark plug threading before installing. After all, you're threading a steel part into a aluminum engine case. Don't over tighten the spark plug, 1/8 to 1/4 turn past finger tight. When using the old spark plug wires, trim them back 1/4" - 1/2" to expose fresh wire, then using a pick type tool, fan out the wires before threading on the new resistor cover. Twist on the new cover about 3 full turns and give it a tug to make sure it's snug. Fits tons of bikes and many models used more than 1 type of cap. Check the part number and photo to see if it's what you need.
Price: 5.55 USD
Location: Schenectady, New York
End Time: 2024-09-09T19:00:35.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Machine Type: Dual Sport Motorcycle, Off-road Motorcycle, Scooter, Street Motorcycle
Color: Black
Manufacturer Part Number: Does Not Apply
Material: rubber
Item Length: 2.5 in
Vintage Part: No
Brand: Unbranded
Type: Coil Boot
Unit Type: Unit
OE/OEM Part Number: LB05EP
Country/Region of Manufacture: Unknown
Universal Fitment: Yes
Unit Quantity: 1
Performance Part: No
