SG-LC3000 Automatic Welding Machine Banner Welder with Swiss Hot Air Gun

Description: Product Description SG-LC3000 PVC/Plastic automatic welding machine banner welder with swiss hot air gun This Kinds of Hot Air Banner Welding machine is use for weld split PVC, PE and other material can be hot melt. it can turn off power in 15minutes automatic if no one operate . When picture size more than printer printing width, need to split the picture to some part, after print out then weld them together. Usually use 502 glue to joint them by hand, but this way is disadvantageous, like: slowly after long time the glue is not hard the glue will dirty picture, work by hand hard to control the quality , etc Advantages: No need glue, use hot air to weld; Temperature, speed, fan motor speed are adjustable; Welder nozzle has a sensor, can make the true temperature accurately; High welding quality. Model number SG-LC3000 Welder Joint width 2-4cm Joint thickness 0.22-2mm Joint speed 0.5-5m/min Joint temp. 30-500℃ Welder power 1200-1800W Welder voltage AC 110V/220V Welder frequency 50HZ/60HZ Welder wheel Aluminum wheel Wire 10m Package size 49*30*29cm 1).Application field Use for weld PVC, PE and other material can be hot melt, like flex, PVC cloth etc. 2).Main technical details Rated voltage: AC110-240V Frequency: 50-60HZ Power: 1000-3000W Temperature scope: 0-500°C Speed scope: 0.5-5m/min Dimension: 41*25*20cm Weight: 15kg Splicing width: 2-4cm 3).Advantage No need glue, use hot air to weld; Temperature, speed, fan motor speed are adjustable; Welder nozzle has a sensor, can make the true temperature accurately; High welding quality. Detailed Images SG-LC3000 PVC/Plastic automatic welding machine banner welder with swiss hot air gun Operation Procedures 1). Turn on the power, according to quality and thickness of the PVC banner, consider the ground circumstance, set the proper termperature and speed, adjust the suitable hot-air blowing rate, wait for machine hot up around 2 minutes. 2). Bring up the machine, place the rubber wheel at the end of the overlap edge. 3). Turn the handle to left down, insert the welder nozzle into the gap of two overlap pieces, then the machine will moving and seaming automatic. 4).During welding, use the gripe to align the moving direction, let the upper piece edge be in touch with the inner side of the welder nozzle. 5). After the machine go pass the overlap edge to the end, the two disjunct pieces will be joined together, then turn the welder handle to right, it will stop moving. 6). Turn off the heater switch, wait the gun come to cold, then turn off the power supply is ok. 7). Notice: To prolong the electrothermal heater, after work it is strongly advice that cooling the heater at first, then turn off the power 5 minutes later. Incase of the power suddenly be off, should handle the welding gun away firstly, and close down the temperature knob, nextly consider the problem of power supply. 8). To get better satisfied bonding effect, the ground of the overlap pieces should be smoothly, hard and heat resistive. We suggest that the operator may do some more test and practice using some samples of the pieces to get the suitable speed and temperature and hot air blowing rate before operate it for seaming formally. Packing & Delivery SG-LC3000 PVC/Plastic automatic welding machine banner welder with swiss hot air gun Certifications System Certification: *GBT/TB28001-2011 Occupational health and Safety Management System; *The generator passed CCC, CE,GS,SGS,EU2,SASO,SONCAP certifications, etc.

Price: 651.13 USD

Location: shenzhenshi

End Time: 2025-01-23T02:41:48.000Z

Shipping Cost: 246.8 USD