VXP Racing Portable ESC Programming Card Program Box Car Boat 90-400A 6-22S

Description: VXP RACING - Portable Programming Card Program Box for High Power High Voltage ESC for CAR & BOAT ESC 90 - 400A 2-22S Lipo No more irritating BEEP BEEP BEEP to program your ESC and to check the Settings. Just plug in and read the Settings and to change the Settings. ( Always plug in Program Box before Power ON ESC or it will revert to Factory Settings ) Only suitable for VXP Racing ESC. Programming Instructions- plug Prog Box to ESC ( align the color wires correctly to the Prog Box )- then plug ESC to Motor, turn ON Radio- plug battery to ESC, power ON (use the Anti Spark Cable, Prog Box will light up, there should not have any melody and beep from the Motor, if have - power OFF then power ON again and again till Motor is quiet)- do your settings - to send settings to ESC ( press and hold the two center buttons - count to from 1 to 5 )- Prog Box screen will says "Data sending to ESC" then a while BLINK - power OFF then power ON ( use Anti Spark Cable as sparking can render the programming to default setting, there should not have any melody and beep from the Motor, if have - power OFF then ON again and again till Motor is quiet)- check your new settings in Prog Box- If yes - power OFF then remove Prog box.- Done If setting does not stick - repeat procedure again. To run Motor after Programming - power ON - not touching the Throttle ( melody then a few Beeps then silence )- Press Throttle - Motor will run. Revert to Factory Settings- power On ESC, power ON Radio ( melody then a few beeps then silence )- plug Prog Box to ESC ( match color wire to the side of Prog Box )- Read settings this will be Factory Settings- make changes if you want- to send settings to ESC ( press and hold the two center buttons - count from 1 to 5 )- Prog Box screen will says "Data sending to ESC" then a while BLINK - power OFF then power ON ( use Anti Spark Cable as sparking can render programming to default settings, there should not have any melody and beep from the Motor, if have - power OFF then ON - again and again till Motor is quiet )- check your new settings in Prog Box- If yes - power OFF then remove prog box.- Done If setting does not stick - repeat procedure again. Anti Spark Cable - Solder a crocodile clip at the end of the Anti Spark Cable . And clip the crocodile clip to the (purposely) exposed part of shrink wrap of the BLACK Cable of the battery. Then connect the main connectors to battery.

Price: 33.99 USD

Location: Singapore

End Time: 2024-03-04T07:07:57.000Z

Shipping Cost: 11.99 USD