Zone Offroad D26N 6" Suspension Lift Kit for 2006-2007 Dodge/Ram 1500 4WD Gas

Description: $1,110.17 This new Zone Offroad 6" suspension system for the 2003-2007 Dodge Ram 2500 is performance packed and budget friendly for those looking to get 37" tires under their HD Dodge truck. The lift uses a unique control arm relocation design. Both the stock upper and lower arms are relocated to relieve angles, properly position the front axle and provide good caster and front pinion angle settings. The 1/4" steel constructed relocation brackets mount directly to stock locations and only require a few new holes to be drilled for extra support. No cutting of the frame or axle mounts is required. Stock alignment adjustability is retained. Stock control arm angles are maintained to provide a great ride, handling and control. In addition to the control arm brackets, all the necessary additional components are included. Full-length coil springs, dropped pitman arm, track bar relocation, sway bar relocation and bump stops are included. The rear kits feature new lift blocks and u-bolts. A rear carrier bearing drop kit is available also for trucks featuring a stock 2-piece rear driveshaft. In stock This new Zone Offroad 6" suspension system for the 2003-2007 Dodge Ram 2500 is performance packed and budget friendly for those looking to get 37" tires under their HD Dodge truck. The lift uses a unique control arm relocation design. Both the stock upper and lower arms are relocated to relieve angles, properly position the front axle and provide good caster and front pinion angle settings. The 1/4" steel constructed relocation brackets mount directly to stock locations and only require a few new holes to be drilled for extra support. No cutting of the frame or axle mounts is required. Stock alignment adjustability is retained. Stock control arm angles are maintained to provide a great ride, handling and control. In addition to the control arm brackets, all the necessary additional components are included. Full-length coil springs, dropped pitman arm, track bar relocation, sway bar relocation and bump stops are included. The rear kits feature new lift blocks and u-bolts. A rear carrier bearing drop kit is available also for trucks featuring a stock 2-piece rear driveshaft. Shop by Category ... Kits Suspension Parts Stabilizers Shock Absorbers Skid Plates Lighting Accessories Kits Suspension Parts Stabilizers Shock Absorbers Skid Plates Lighting Accessories DON'T KNOW WHERE TO START? Contact us using eBay messages We will help you find the right lift kit for your Truck, Jeep or SUV. We install everything we sell!!! Zone Offroad D26N 6" Suspension Lift KitDescriptionZone Offroad D26N 6" Suspension Lift Kit This new Zone Offroad 6" suspension system for the 2003-2007 Dodge Ram 2500 is performance packed and budget friendly for those looking to get 37" tires under their HD Dodge truck. The lift uses a unique control arm relocation design. Both the stock upper and lower arms are relocated to relieve angles, properly position the front axle and provide good caster and front pinion angle settings. The 1/4" steel constructed relocation brackets mount directly to stock locations and only require a few new holes to be drilled for extra support. No cutting of the frame or axle mounts is required. Stock alignment adjustability is retained. Stock control arm angles are maintained to provide a great ride, handling and control. In addition to the control arm brackets, all the necessary additional components are included. Full-length coil springs, dropped pitman arm, track bar relocation, sway bar relocation and bump stops are included. The rear kits feature new lift blocks and u-bolts. A rear carrier bearing drop kit is available also for trucks featuring a stock 2-piece rear driveshaft.FeaturesUnique upper and lower control arm relocation bracket design.Heavy 1/4" steel construction.No cutting of the frame required.High performance at a low price.Fitment Years Make Model Drive Engine 2006-2007 Dodge/Ram 1500 4WD Gas 2003-2007 Dodge/Ram 3500 4WD Diesel 2003-2007 Dodge/Ram 3500 4WD Gas 2003-2007 Dodge/Ram 2500 4WD Diesel 2003-2007 Dodge/Ram 2500 4WD Gas Fitment Front Lift Height: 6" Front Lift Method: Coil Springs Rear Lift Height: 4" Rear Lift Method: Block Kit Difficulty Level 1-5: 3 Wheel Size: 17 X 9 Back Spacing: 4.5-5" Max Tire Size: 37 X 12.50 2-piece rear driveshaft requires carrier bearing drop kit D5505 Will not fit dually applications Rear axle diameter will be 3.5" or 4", measure before ordering Minor trimming may be required with some tire/wheel combinations. A front bumper spacer kit (D5801) is available to gain clearance if necessary If driveline vibration is present, some 6" kits may require the transfer case indexing kit (D5805). See installation instructions (step 17) for fitment details. Will work with Power Wagon models with the addition of sway bar link kit D5301. Power Wagon models came factory with a 2" taller ride height so net lift gain will be 4" over stock. Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring Install Time Hrs: 6-8 ATTN State of California Consumers warning: Cancer and Reproductive Harm www.p65warning.ca.gov Please note: We are a "Ma/Pa" brick & mortar suspension shop currently accepting Paypal, cash in person and all major credit cards by phone. If you have questions or need technical support, upgrades or accessories we can be reached most times through eBay. **SHIPPING TO , AND REQUIRE ADDITIONAL SHIPPING. Get in touch with us using eBay messages for a shipping quote We accept Paypal or connect with us through eBay for alternate payment methods

Price: 1234.55 USD

Location: Nashville, Tennessee

End Time: 2025-01-24T08:50:33.000Z

Shipping Cost: 0 USD